Effect of lining materials on fracture resistance of amalgam restorations

Eminkahyagil, N
Orcan, Y
Gokalp, S


Effect of Calcination on Microstructure and Antibacterial Activity of Silver-Containing Silica Coatings
Durucan, Caner (Wiley, 2010-05-01)
Silver nanoparticle containing silica coatings on soda-lime glass were prepared by the sol-gel process The effect of thermal densification treatment at different temperatures in the range of 100-700 degrees C on microstructure and antibacterial properties of the coatings were examined The structural characterization of the coatings was performed by using scanning electron microscope, X-ray diffraction, UV-visible and X-ray photoelectron spectroscopy (XPS), and atomic force microscope (AFM) The antibacterial...
Effect of polymers on the rheological properties of KCI/polymer type drilling fluids
Alikaya, Tolga; Kök, Mustafa Verşan; Department of Petroleum and Natural Gas Engineering (2001)
Effect of bleaching on color change and refractive index of dental composite resins
HUBBEZOĞLU, İHSAN; Akaoglu, Baris; DOĞAN, ARİFE; Keskin, Selda; Bolayir, Giray; ÖZÇELİK, SÜLEYMAN; DOĞAN, ORHAN MURAT (Japanese Society for Dental Materials and Devices, 2008-01-01)
This study investigated the effects of three bleaching agents (Whiteness Perfect, Whiteness Super, and Whiteness HP) on the color change and refractive index of three dental composites (Admira, Durafill VS, and Gradia Direct). Twenty diskshaped specimens (10 x 2 mm) of each composite were prepared and divided into four subgroups (n = 5). An unbleached group was used as a control, while the remaining specimens in the three subgroups were bleached with one of the bleaching agents respectively. Color change wa...
Effect of microvoids on anomalous moisture absorption of quartz/BMI composite laminates
Hurdelbrink, Keith R.; Grace, Landon R.; Güloğlu, Görkem Eğemen; Siddique, Zahed; Anderson, Jacob P.; Altan, M. Cengiz (2014-01-01)
Copyright © 2014 by ASME.The focus of this paper was to investigate the effects of microvoid content in quartz/BMI laminates on both short and long-term moisture absorption dynamics. The moisture absorption characteristics for the laminates were experimentally obtained by water immersion tests at 25°C of three-ply quartz/BMI samples that contain voids, ranging from 8.6% to 13.7% by volume. The void levels were obtained by conditioning the prepreg at different moisture levels for 48 hours in an environmental...
Effect of Polymers on the Rheological Properties of KCl Polymer Type Drilling Fluid
Kök, Mustafa Verşan (2005-05-01)
In the course of this research, the effect of two polymers (xanthan gum and polyanionic cellulose) on the rheological properties of KCl/polymer type drilling fluids was investigated. Non-Newtonian drilling fluids are conventionally characterized by rheological models (Bingham Plastic, Power Law, Casson, Herchel-Bulkley and Robertson-Stiff). In this research, forty-five KCl/polymer data sets of varying compositions are prepared. Polymer addition to the system has affected the model and caused a variation of ...
Citation Formats
N. Eminkahyagil, Y. Orcan, and S. Gokalp, “Effect of lining materials on fracture resistance of amalgam restorations,” 2001, vol. 80, p. 1279, Accessed: 00, 2020. [Online]. Available: https://hdl.handle.net/11511/66881.