Thermal behaviour of wooden prefabricated panels.

1973
Alpaslan, Mehmet Ali
Show full item record
94
views
0
downloads
https://hdl.handle.net/11511/7010
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Thermal behaviour of single core cables in air.
Çorakçı, H. Şükrü; Department of Electrical Engineering (1982)
Thermal analysis of gray cast iron by interpretation of cooling curves
Çetin, Arda; Kalkanlı, Ali; Department of Metallurgical and Materials Engineering (2002)
The aim of the present work is to investigate the relations between data obtained from the cooling curve and its first and second derivatives and the as-cast microstructure of gray cast iron, assuming that the cooling curve reflects the complete history of the solidification process. Fourteen different alloy compositions are prepared in order to obtain statistical predictive models to relate cooling curve parameters with the solidification variables such as chemical analysis, inoculation, graphite shape, pr...
THERMAL CONDUCTİVİTY OF COMPACTED GRAPHİTE IRON
Kalkanlı, Ali(2013-12-31)
THERMAL CONDUCTİVİTY OF COMPACTED GRAPHİTE IRON
Thermal degradation of polystyrene composites. Part II. The effect of nanoclay
KAYA, Hatice; Kaynak, Cevdet; Hacaloğlu, Jale (2016-07-01)
In this work, thermal degradation behavior polystyrene/organoclay nanocomposites containing tribromophenol end-capped brominated epoxy oligomer, (BE) with or without Sb2O3 were investigated systematically via direct pyrolysis mass spectrometry. Incorporation of organically modified montmorillonite into polystyrene, (PS) matrix not only increased thermal stability but also the probability of radical recombination, disproportionation and carbonization reactions causing increase in the char yield. Exfoliation ...
Thermal degradation of polystyrene composites. Part I. The effect of brominated polyepoxy and antimony oxide
Kaya, Hatice; Hacaloğlu, Jale (2014-01-01)
Thermal degradation of polystyrene (PS) involving brominated polyepoxy (BA) and antimony oxide (PS/BE/Sb2O3) was studied systematically via direct pyrolysis mass spectrometry. Thermal decomposition of brominated polyepoxy was started by loss of end groups. The relative yields of high mass thermal degradation products of PS and the product distribution of brominated polyepoxy and antimony oxide were changed noticeably during the pyrolysis of PS/BE/Sb2O3 composite. Its thermal decomposition was initiated by t...
Citation Formats
M. A. Alpaslan, “Thermal behaviour of wooden prefabricated panels.,” Middle East Technical University, 1973.
METU IIS - Integrated Information Service open@metu.edu.tr