Effect of cam profiles on performance of internal combustion engines for the development of locally manufactured Diesel Engine.

1966
Şalfun, Risar
Show full item record
53
views
0
downloads
https://hdl.handle.net/11511/7342
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Effect of initial microstructure on the development of rolling and annealing textures in Al-killed low-C steel.
Akdeniz, M Vedat; Department of Metallurgical Engineering (1985)
Effect of synthetic fibers on flexural performance of normal and high performance concrete
Şengün, Emin; Alam, Burhan; Yaman, İsmail Özgür (null; 2016-09-19)
Macro synthetic fiber incorporated concretes are increasingly used for concrete applications owing to their high energy absorption capacity, toughness and impact resistance. The aim of this study is twofold; first to investigate the effects of synthetic fibers on the flexural performance and thus the energy absorption characteristics of normal and high performance concrete (HPC), and secondly to investigate the effects of specimen size. For this experimental study, eight concrete groups were designed using ...
Effect of cyclic thermal loading on the performance of steel H-piles in integral bridges with stub-abutments
Dicleli, Murat (Elsevier BV, 2004-02-01)
In this paper, analytical equations are developed to estimate the lateral displacement capacity of steel-H piles in integral bridges with stub abutments subjected to cyclic thermal variations. First, steel H piles that are capable of sustaining large plastic deformations are identified based on their local buckling strength. The normalized moment-curvature relationships of these piles are then obtained for various axial load levels. Next, a low-cycle fatigue damage model is employed to determine the maximum...
Effect of isolator and ground motion characteristics on the performance of seismic-isolated bridges
Dicleli, Murat (Wiley, 2006-02-01)
This paper presents the effect of isolator and substructure properties as well as the frequency characteristics and intensity of the ground motion on the performance of seismic-isolated bridges (SIBs) and examines some critical design clauses in the AASHTO Guide Specification for Seismic Isolation Design. For this purpose, a parametric study, involving more than 800 non-linear time history analyses of simplified structural models representative of typical SIBs, is conducted. The results from the parametric ...
Effect of injection timing on indicated and emission characteristics of a diesel engine.
Ergüdenler, Ali; Department of Mechanical Engineering (1986)
Citation Formats
R. Şalfun, “Effect of cam profiles on performance of internal combustion engines for the development of locally manufactured Diesel Engine.,” Middle East Technical University, 1966.
METU IIS - Integrated Information Service open@metu.edu.tr