Effect of injection timing on indicated and emission characteristics of a diesel engine.

1986
Ergüdenler, Ali
Show full item record
37
views
0
downloads
https://hdl.handle.net/11511/5601
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Effect of Manifold Pressure on the Performance of a Diesel Engine.
Öner, Ali Ercan; Department of Mechanical Engineering (1966)
Effect of distributor rotation on gas mixing in a fluidized bed.
Esin, Ali; Çakaloz, Temel; Department of Chemical Engineering (1978)
Effect of cyclic thermal loading on the performance of steel H-piles in integral bridges with stub-abutments
Dicleli, Murat (Elsevier BV, 2004-02-01)
In this paper, analytical equations are developed to estimate the lateral displacement capacity of steel-H piles in integral bridges with stub abutments subjected to cyclic thermal variations. First, steel H piles that are capable of sustaining large plastic deformations are identified based on their local buckling strength. The normalized moment-curvature relationships of these piles are then obtained for various axial load levels. Next, a low-cycle fatigue damage model is employed to determine the maximum...
Effect of tube surface geometry on the rate of heat transfer in desalination by evaporation.
Özgen, Canan; Somer, Tarık G.; Department of Chemical Engineering (1978)
Effect of Fillet Rolling Load on the Fatigue Performance of a Micro-Alloy Steel Diesel Engine Crankshaft
Cevik, Gul; Gürbüz, Rıza (2017-01-01)
Fillet rolling process is an effective method used to improve the fatigue performance of crankshafts by hardening the fillet region and inducing compressive residual stresses. This paper summarizes the work conducted to investigate the effect of rolling load on fatigue behaviour of a micro-alloy steel crankshaft used in diesel engine applications. Based on the staircase test methodology, component-scale resonant bending fatigue tests were conducted to obtain stress versus number of cycles curves and to eval...
Citation Formats
A. Ergüdenler, “Effect of injection timing on indicated and emission characteristics of a diesel engine.,” Middle East Technical University, 1986.
METU IIS - Integrated Information Service open@metu.edu.tr