Determination of flow through centrifugal pump impellers.

1969
Acarbay, Ayşe
Show full item record
123
views
0
downloads
https://hdl.handle.net/11511/7543
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Determination of rough surface contact stiffness coefficient
Yıldırım, Emine Gülşah; Akkök, Metin; Department of Mechanical Engineering (2017)
In this thesis, the resistance against deformation under the effect of loading, which is simply called as stiffness, is investigated for the contacting bodies. The contact stiffness at mixed lubrication regime is tried to be found for line contact. Because of the mixed lubrication regime, the overall contact stiffness is investigated in two major parts as asperity stiffness and oil film stiffness which are considered to be connected in parallel in a spring model. Also, overall stiffness is calculated by reg...
Determination of out-of-step blockibg conditions in high voltage networks.
Atabay, Tarhan M H; Department of Electrical Engineering (1973)
Determination of network delay distribution over the internet
Karakaş, Mehmet; Ergül, Faruk Rüyal; Department of Electrical and Electronics Engineering (2003)
The rapid growth of the Internet and the proliferation of its new applications pose a serious challenge in network performance management and monitoring. The current Internet has no mechanism for providing feedback on network congestion to the end-systems at the IP layer. For applications and their end hosts, end-to-end measurements may be the only way of measuring network performance. Understanding the packet delay and loss behavior of the Internet is important for proper design of network algorithms such ...
Determination of transient and steady state thermal stresses and moments through electrical analogy.
Anlağan, Ömer; Department of Mechanical Engineering (1969)
Calculation of carrier losses on long multiconductor transposed transmission lines.
Akgün, Ahmet; Department of Electrical Engineering (1971)
Citation Formats
A. Acarbay, “Determination of flow through centrifugal pump impellers.,” Middle East Technical University, 1969.
METU IIS - Integrated Information Service open@metu.edu.tr