Effect of subcooling on boiling flow instabilities in a heated single channel upflow system.

1977
Ergür, Hasan Semih
Show full item record
44
views
0
downloads
https://hdl.handle.net/11511/7666
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Effect of subcooling on transient two-phase flow instabilities in a heated single channel upflow system.
Uçar, Irfan; Department of Mechanical Engineering (1977)
Effect of microvoids on anomalous moisture absorption of quartz/BMI composite laminates
Hurdelbrink, Keith R.; Grace, Landon R.; Güloğlu, Görkem Eğemen; Siddique, Zahed; Anderson, Jacob P.; Altan, M. Cengiz (2014-01-01)
Copyright © 2014 by ASME.The focus of this paper was to investigate the effects of microvoid content in quartz/BMI laminates on both short and long-term moisture absorption dynamics. The moisture absorption characteristics for the laminates were experimentally obtained by water immersion tests at 25°C of three-ply quartz/BMI samples that contain voids, ranging from 8.6% to 13.7% by volume. The void levels were obtained by conditioning the prepreg at different moisture levels for 48 hours in an environmental...
Effect of distributor rotation on gas mixing in a fluidized bed.
Esin, Ali; Çakaloz, Temel; Department of Chemical Engineering (1978)
Effect of lead core heating on the seismic performance of bridges isolated with LRB in near-fault zones
Ozdemir, Gokhan; Dicleli, Murat (2012-11-01)
In this paper, the effect of lead core heating and associated strength deterioration on the seismic response of bridges isolated with lead rubber bearings (LRB) is investigated as a function of the characteristics of the isolator and near fault ground motions with forward rupture directivity effect. Furthermore, the ability of bounding analyses to provide a design envelope for maximum isolator force and maximum isolator displacement is verified. For this purpose, a series of nonlinear dynamic analyses are c...
Effect of coarse aggregate size on interfacial cracking under uniaxial compression
Akcaoglu, T; Tokyay, Mustafa; Celik, T (2002-12-01)
The effects of aggregate type and size are important parameters in the formation of interfacial transition zone (ITZ) structure and subsequently in the failure process of concrete. The influence of surface, rigidity and size of aggregates and water/cement (w/c) ratio of the matrix on bond strength at the ITZ and the interrelationship between the bond and the matrix in the failure process of concrete under uniaxial compression were studied. For this purpose a series of experiments were designed and carried o...
Citation Formats
H. S. Ergür, “Effect of subcooling on boiling flow instabilities in a heated single channel upflow system.,” Middle East Technical University, 1977.
METU IIS - Integrated Information Service open@metu.edu.tr