Grinding Operation of a Workpiece with an Unknown Sahpe Considering Tool Deflection Compensation

2018-07-06
Dönder, Abdülhamit
Latıfı Navıd, Masoud
Konukseven, Erhan İlhan
Show full item record
161
views
0
downloads
http://umtik.com/2018/index-tr.phtml
https://hdl.handle.net/11511/78556
18th International Conference on Machine Design and Production, 2018
Department of Mechanical Engineering, Conference / Seminar

Suggestions

Grinding systems applied to Seydişehir bauxite ores.
Lütfullahoğlu, H. Kenan; Department of Mining Engineering (1984)
Cutting strategies for forging die manufacturing on cnc milling machines
Özgen, Arda; Gökler, Mustafa İlhan; Department of Mechanical Engineering (2008)
Manufacturing of dies has been presenting greater requirements of geometrical accuracy, dimensional precision and surface quality as well as decrease in costs and manufacturing times. Although proper cutting parameter values are utilized to obtain high geometrical accuracy and surface quality, there may exist geometrical discrepancy between the designed and the manufactured surface profile of the die cavities. In milling process; cutting speed, step over and feed are the main cutting parameters and these pa...
Grinding chracteristics of Küre copper ore
Fidan, Bülent; Arol, Ali İhsan; Department of Mining Engineering (1990)
Punching shear tests of normal- and high-strength concrete flat plates
Ozden, Sevket; Ersoy, Ugur; Ozturan, Turan (Canadian Science Publishing, 2006-11-01)
Experimental research was conducted to investigate the punching shear performance of flat plates. A large number of slab specimens of normal- and high-strength concrete were tested Under concentric and eccentric loads. The effects of flexural reinforcement and the use of steel fiber reinforcernent were investigated. Experimental expressions werw developed for the computation Of residual slab strength. Experimentally observed punching, shear capacities were compared with those from the provisions of Canadian...
Moving contact problems involving a rigid punch and a functionally graded coating
Balci, Mehmet N.; Dağ, Serkan (Elsevier BV, 2020-05-01)
Frictional contact mechanics analysis for a rigid moving punch of an arbitrary profile and a functionally graded coating/homogeneous substrate system is carried out. The rigid punch slides over the coating at a constant subsonic speed. Smooth variation of the shear modulus of the graded coating is defined by an exponential function and the variation of the Poisson's ratio is assumed negligible. Coulomb's friction law is adopted. Hence, tangential force is proportional to the normal applied force through the...
Citation Formats
A. Dönder, M. Latıfı Navıd, and E. İ. Konukseven, “Grinding Operation of a Workpiece with an Unknown Sahpe Considering Tool Deflection Compensation,” presented at the 18th International Conference on Machine Design and Production, 2018, Eskişehir, Turkey, 2018, Accessed: 00, 2021. [Online]. Available: http://umtik.com/2018/index-tr.phtml.
METU IIS - Integrated Information Service open@metu.edu.tr