A mid point inverter for induction machine speed control

Download

001260.pdf

Date

1987

Author

Dinçer, A Levent

Metadata

Show full item record

Item Usage Stats

119
views

0
downloads

URI

https://hdl.handle.net/11511/7908

Collections

Graduate School of Natural and Applied Sciences, Thesis

Suggestions

OpenMETU
Core

A medium frequency converter for induction heating. Üçtuğ, Yıldırım; Department of Electrical Engineering (1982)
A 6-3 KV thyristorized switch for direct-on starting of induction motors Rahman, Mahfujur; Ermiş, Muammer; Ertan, Bülent; Department of Electrical and Electronics Engineering (1991)
A switch mode power supply for producing half wave sine output Kaya, İbrahim; Ertan, Hulusi Bülent; Department of Electrical and Electronics Engineering (2008) In this thesis; analysis, design and implementation of a DC-DC converter with active clamp forward topology is presented. The main objective of this thesis is generating a rectified sinusoidal voltage at the output of the converter. This is accomplished by changing the reference signal of the converter. The converter output is applied to an inverter circuit in order to obtain sinusoidal waveform. The zero crossing points of the converter is detected and the inverter drive signals are generated in order to o...
A 40 kHz unity power factor boost converter with phase shifted parallel IGBTs for medium power operation Yafaoui, Ahmad; Çadırcı, Işık; Ermiş, Muammer; Department of Electrical and Electronics Engineering (1998)
A micro power generator with planar coils on parylene cantilevers Sari, Ibrahim; Balkan, Raif Tuna; Külah, Haluk (2008-06-25) In this paper an electromagnetic vibration based micro power generator is presented. The proposed generator is composed of parylene cantilevers on which planar coils are fabricated. The system uses external vibrations to generate power by virtue of the relative motion between the cantilevers and a magnet. The parameters of the micro generator have been optimized for maximum output and it has been fabricated in micro scale. Initials tests show that 8.75 mV could be obtained from the proposed generator at a v...

Citation Formats

A. L. Dinçer, “A mid point inverter for induction machine speed control,” Middle East Technical University, 1987.