Multicomponent seismic loss estimation on the North Anatolian Fault Zone (Turkey)

2015-12-14
Seismic loss estimation is essential to incorporate seismic risk of structures into an efficient decision-making framework. Evaluation of seismic damage of structures requires a multidisciplinary approach including earthquake source characterization, seismological prediction of earthquake-induced ground motions, prediction of structural responses exposed to ground shaking, and finally estimation of induced damage to structures. As the study region, Erzincan, a city on the eastern part of Turkey is selected which is located in the conjunction of three active strike-slip faults as North Anatolian Fault, North East Anatolian Fault and Ovacik fault. Erzincan city center is in a pull-apart basin underlain by soft sediments that has experienced devastating earthquakes such as the 27 December 1939 (Ms=8.0) and the 13 March 1992 (Mw=6.6) events, resulting in extensive amount of physical as well as economical losses. These losses are attributed to not only the high seismicity of the area but also as a result of the seismic vulnerability of the constructed environment. This study focuses on the seismic damage estimation of Erzincan using both regional seismicity and local building information. For this purpose, first, ground motion records are selected from a set of scenario events simulated with the stochastic finite fault methodology using regional seismicity parameters. Then, existing building stock are classified into specified groups represented with equivalent single-degree-of-freedom systems. Through these models, the inelastic dynamic structural responses are investigated with non-linear time history analysis. To assess the potential seismic damage in the study area, fragility curves for the classified structural types are derived. Finally, the estimated damage is compared with the observed damage during the 1992 Erzincan earthquake. The results are observed to have a reasonable match indicating the efficiency of the ground motion simulations and building analyses.
2015 American Geophysical Union Annual Fall Meeting, (14 - 18 Aralık 2015)

Suggestions

Seismic Performance Assessment of Masonry Buildings Using In Situ Material Properties
Cobanoglu, Baran; ALDEMİR, ALPER; Demirel, Ismail Ozan; Binici, Barış; Canbay, Erdem; Yakut, Ahmet (American Society of Civil Engineers (ASCE), 2017-08-01)
Seismic performance assessment of existing buildings requires the existing material's properties to be determined as this has a significant influence on the seismic risk. As one of the most common construction type in Turkey, masonry buildings are assessed generally based on the recommended material properties specified in relevant codes as opposed to testing of samples taken from the existing buildings. However, due to different material types and workmanship quality, the specified properties might be quit...
Fragility based assessment of lowrise and midrise reinforced concrete frame buildings in Turkey
Ay, Bekir Özer; Erberik, Murat Altuğ; Department of Civil Engineering (2006)
In this study, structural vulnerability of reinforced concrete frame structures by considering the countryspecific characteristics is investigated to manage the earthquake risk and to develop strategies for disaster mitigation. Lowrise and midrise reinforced concrete structures, which constitute approximately 75% of the total building stock in Turkey, are focused in this fragilitybased assessment. The seismic design of 3, 5, 7 and 9story reinforced concrete frame structures are carried out according to the ...
Derivation of site-specific UHS based on simulated ground motions and its parametric effects on building fragility
Azari Sisi, Aida; Askan Gündoğan, Ayşegül; Department of Civil Engineering (2016)
Estimation of seismic demands is essential for the purpose of structural seismic design and analyses. It is significant to obtain reliable ground motion amplitudes to estimate seismic damage on structures in a realistic manner. The ground motion simulation methodologies provide a physical approach to estimate seismic demands in the regions with sparse recording data and scarce networks. This dissertation consists of two main parts: In the first part, site-specific uniform hazard spectrum (UHS) of Erzincan r...
Risk assessment and pricing of natural hazards earthquake case
Kestel, Sevtap Ayşe (null; 2015-10-16)
The potential impacts of natural hazards are enormous. In such catastrophes the economies and human lives are exposed to unpredictable losses. Probabilistic modeling of such hazards require long term historical information which enables researchers to determine the potential risk for certain periods. However, even though its increasing trend in the frequency of such events, the factors influencing the magnitude of the losses are diverse and many. Earthquakes are the most severe one as its occurrence and sev...
Prediction of potential damage due to severe earthquakes
Yücemen, Mehmet Semih; Pay, AC (2004-01-01)
A statistical model is developed to estimate the seismic vulnerability of low- to mid-rise reinforced concrete buildings. The model is based on a novel utilization of the discriminant analysis technique of multivariate statistics. Number of stories above the ground level (N), soft story index (SSI), overhang ratio (OHR), minimum normalized lateral stiffness index (MNLSTFI), minimum normalized lateral strength index (MNLSI) and normalized redundancy score (NRS) are selected as the basic estimation variables....
Citation Formats
S. Karim Zadeh Naghshineh, A. Askan Gündoğan, M. A. Erberik, and A. Yakut, “Multicomponent seismic loss estimation on the North Anatolian Fault Zone (Turkey),” presented at the 2015 American Geophysical Union Annual Fall Meeting, (14 - 18 Aralık 2015), San-Francisco, ABD, 2015, Accessed: 00, 2021. [Online]. Available: https://agu.confex.com/agu/fm15/webprogram/Paper59407.html.