Implementation of a real-time reed-solomon encoder and decoder using TMS32010

Download

002711 (1).pdf

Date

1989

Author

Can, Semih

Metadata

Show full item record

Item Usage Stats

112
views

0
downloads

URI

https://hdl.handle.net/11511/8460

Collections

Graduate School of Natural and Applied Sciences, Thesis

Suggestions

OpenMETU
Core

Implementation of an 8-bit microcontroller with system c Kesen, Lokman; Aşkar, Murat; Department of Electrical and Electronics Engineering (2004) In this thesis, an 8-bit microcontroller, 8051 core, is implemented using SystemC programming language. SystemC is a new generation co-design language which is capable of both programming software and describing hardware parts of a complete system. The benefit of this design environment appears while developing a System-on-Chip (SoC), that is a system consisting both custom hardware parts and embedded software parts. SystemC is not a completely new language, but based on C++ with some additional class libra...
Implementation of (63,43) reed-solomon decoder using the Z80 general purpose microprocessor Özdemir, F Taner; Bilgen, Semih; Department of Electrical and Electronics Engineering (1990)
Implementation of a risc microcontroller using fpga Gümüş, Raşit; Güran, Hasan; Department of Electrical and Electronics Engineering (2005) In this thesis a microcontroller core is developed in an FPGA. Its instruction set is compatible with the microcontroller PIC16XX series by Microchip Technology. The microcontroller employs a RISC architecture with separate busses for instructions and data. Our goal in this research is to implement and evaluate the design in the FPGA. Increasing performance and gate capacity of recent FPGA devices permits complex logic systems to be implemented on a single programmable device. Such a growing complexity dema...
Implementation of an Enhanced Target Localization and Identification Algorithm on a Magnetic WSN Baghaee, Sajjad; GÜRBÜZ, SEVGİ ZÜBEYDE; Uysal, Elif (2015-10-01) Wireless sensor networks (WSNs) are ubiquitous in a wide range of applications requiring the monitoring of physical and environmental variables, such as target localization and identification. One of these applications is the sensing of ferromagnetic objects. In typical applications, the area to be monitored is typically large compared to the sensing radius of each magnetic sensor. On the other hand, the RF communication radii of WSN nodes are invariably larger than the sensing radii. This makes it economic...
Implementation of an XPL comiler . Can, Fazli; Department of Computer Science (1979)

Citation Formats

S. Can, “Implementation of a real-time reed-solomon encoder and decoder using TMS32010,” Middle East Technical University, 1989.