Effect of openings on the seismic response of AAC infilled frames and an innovative method to improve performance

2020-01-01
Todorovic, Lana
Demirel, Ismail Ozan
Binici, Barış
Autoclaved aerated concrete (AAC) is an attractive building material with lightweight, good insulation, fireproofing, and durability characteristics. The seismic response of AAC requires an in-depth understanding as its use as infill walls is gaining popularity in seismically active regions of many countries in Europe, Middle East, and Asia. Recent studies on the seismic response of AAC infill walls were mostly conducted on solid AAC walls without considering openings and simulated earthquake loading was applied in the plane of the frame. In this study, recent tests on the out-of-plane and in-plane seismic response of AAC infill walls with openings were investigated experimentally. The door opening was considered for the purposes of the study. The limited deformation capacity of the AAC infill walls was observed. An innovative system to improve the performance of AAC infill walls was briefly discussed.
INTERNATIONAL JOURNAL OF MASONRY RESEARCH AND INNOVATION

Suggestions

Effect of Openings on the Seismic Response of AAC Infilled Frames
Todorovic, Lana; Demirel, İsmail Ozan; Binici, Barış (2019-10-11)
Autoclaved aerated concrete (AAC) is an attractive building material with lightweight, good insulation, fireproofing, and durability characteristics. The seismic response of AAC requires an in-depth understanding as its use as infill walls is gaining popularity in seismically active regions of many countries in Europe, Middle East, and Asia. Recent studies on the seismic response of AAC infill walls were mostly conducted on solid AAC walls without considering openings and simulated earthquake loading was ap...
Effect of specimen size, fiber type and concrete strength on the flexural performance of fiber reinforced concrete
Güzelce, Aydinç; Yaman, İsmail Özgür; Department of Civil Engineering (2019)
To overcome the brittleness of concrete, fiber reinforcement is a commonly used material, which highly increases the toughness of concrete in a cost-effective way. The aim of this study is to assess the effect of different fiber parameters on the flexural behavior of fiber reinforced concrete. Bending tests were performed on two different beam sizes made of 20 different concrete batches. The type and amount of the fibers along with the grade of the concrete were changed to form this batch combination. The f...
Effect of Fly Ash Fineness on the Activation of Geopolymer Concrete
Aleessa Alam, Burhan; Yaman, İsmail Özgür (2012-10-05)
In the field of construction materials and particularly in concrete, cement is considered as a key element since it generates a strong and durable material through a simple hydration process. However, for many reasons (mainly economic and environmental) researchers are trying to find a new material that could replace cement or at least part of it as a binding agent in concrete. Regarding this issue, cement replacement materials like fly ash and slag have taken the lead during the last few decades. These mat...
Effect of fiber type and concrete strength on the energy absorption capacity of fiber reinforced concrete plates under quasi-static bending
Mercan, Ali Macit; Yaman, İsmail Özgür; Department of Civil Engineering (2019)
With all the known solid advantages of concrete, it has also limitations in its mechanical properties, such as low ductility, tensile strength and energy absorption capacity/toughness. In order to eliminate or minimize these limitations, some developments have been worked up by introducing natural or artificial fibers into the concrete mixture. The main scope of this thesis is to observe the effect of different fiber types and dosages on the performance of two different concrete grades. Two steel fibers wit...
Influence of degree of saturation on the borehole sealing performance of an expansive cement grout
Akgün, Haluk (Elsevier BV, 2000-02-01)
The strength measures of expansive cement grout borehole plugs cast in welded tuff cylinders is investigated as a function of the degree of saturation of the plugged rock cylinder and of borehole size. Details on experimental procedure regarding rock cylinder and cement grout preparation, sample curing conditions, experimental apparatus, sample loading, mechanical characterization of the rock, and cement grout, along with procedures for the determination of the sample saturation assuming uniform saturation,...
Citation Formats
L. Todorovic, I. O. Demirel, and B. Binici, “Effect of openings on the seismic response of AAC infilled frames and an innovative method to improve performance,” INTERNATIONAL JOURNAL OF MASONRY RESEARCH AND INNOVATION, pp. 226–247, 2020, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/88512.