Comparison of different methods of beta-galactosidase immobilization on/in poly (2-hydroxyethyl methacrylate) supports.

Download

056763.pdf

Date

1996

Author

Baran, Erkan Türker

Metadata

Show full item record

Item Usage Stats

70
views

0
downloads

URI

https://hdl.handle.net/11511/8884

Collections

Graduate School of Natural and Applied Sciences, Thesis

Suggestions

OpenMETU
Core

Comparison of Two Alternative Fabrication Processes for a Three-Axis Capacitive MEMS Accelerometer Tez, S.; Akın, Tayfun (Elsevier BV; 2012-09-12) This paper presents a three-axis capacitive MEMS accelerometer implemented by fabricating lateral and vertical accelerometers in a same die with two alternative processes: a double glass modified dissolved wafer (DGM-DWP) and a double glass modified silicon-on-glass (DGM-SOG) processes. The accelerometers are implemented with a 35 mu m structural layer, and the three-axis accelerometer die measures 12mmx7mmx1mm in each process. Each process includes a second glass wafer which, not only allows implementing a...
Comparison of the short and long-term degradation behaviors of as-cast pure Mg, AZ91 and WE43 alloys Ocal, Ezgi Butev; ESEN, ZİYA; Aydınol, Mehmet Kadri; Dericioğlu, Arcan Fehmi (Elsevier BV, 2020-02-01) The corrosion behaviors of pure magnesium, AZ91, and WE43 alloys have been evaluated by weight loss, hydrogen evolution rate, pH change measurements and potentiodynamic polarization as well as electrochemical impedance spectroscopy (EIS) methods. Main corrosion product formed on the surface of Mg/Mg-alloys after immersion of 24 h was Mg(OH)(2) on the other hand, at the end of the 20 days additional CaCO3 which was found to display a critical role in degradation characteristics of the samples, was found. Exa...
Comparison of Different Synthesis Methods to Produce Lithium Triborate and Their Effects on Its Thermoluminescent Property Yılmaz, Ayşen; Yılmaz, Ayşen (2010-10-01) Lithium triborate (LiB3O5) was produced by different synthesis methods, which included high-temperature solid-state reaction, microwave-assisted high-temperature solid-state reaction, and precipitation-assisted high-temperature solid-state reaction. After the synthesis, metal oxides (CuO and Al2O3) were doped into LiB3O5 to enhance its thermoluminescent (TL) properties, and the TL intensities were compared with each other. The identification and characteristics of undoped and doped LiB3O5 were determined by...
Comparison of household refrigeration cycle design outputs using R134a and R600a as working fluids Bayer, Özgür; Oskay, Rüknettin (null; 2014-05-31)
Comparison of the Effects of Nonlinearities for Si MOSFET and GaN E-HEMT Based VSIs Yuruk, Huseyin; Keysan, Ozan; Ulutas, Baris (2021-07-01) Nonlinearities in voltage source inverters (VSIs) such as; dead time, switching time, delay time, voltage drops on the power switches, parasitic capacitance, etc., are considered to be the main sources of the output voltage distortions. These distortions result in low-order harmonics in the output current, which in turn increase core losses and create torque ripples. In particular, for low-speed applications with low-inductance motors, the control performance and the stability of the system degrades substan...

Citation Formats

E. T. Baran, “Comparison of different methods of beta-galactosidase immobilization on/in poly (2-hydroxyethyl methacrylate) supports.,” Middle East Technical University, 1996.