Yüksek basınçlı glow deşarjların kendiliğinden yapılanmasının ve kararlı yanma şartlarının incelenmesi

Date

2011-05-01

Author

Yedierler, Burak
Rafatov, İsmail

Metadata

Show full item record

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Item Usage Stats

21
views

0
downloads

URI

https://hdl.handle.net/11511/95791

Collections

Department of Physics, Project and Design

Suggestions

OpenMETU
Core

Effect of high pressure homogenization (microfluidization) on the quality of Ottoman strawbery (F.ananassa) juice Karaçam, Çağrı Helin; Öztop, Halil Mecit; Şahin, Serpil; Department of Food Engineering (2015) High pressure homogenization (microfluidization) is a non-thermal process that is commonly used in food processing. Microfluidization provides convenience because it does not require any chemical. Also, the quality of juice is affected minimally. In this study, the effect of high-pressure homogenization (microfluidization) on the physical and chemical properties of Ottoman strawberry juice was evaluated. Two different pass numbers and two different pressures were used for the homogenization treatment. Effec...
Experimental and numerical investigation of ballistic impact behaviour of high strength aluminium plates Başaran, Güralp; Gürses, Ercan; Department of Aerospace Engineering (2019) A hybrid solution method was used to examine the ballistic collision situation to be used in armored vehicle design. This hybrid solution method includes an Artificial Neural Network (ANN) and a Finite Element (FE) solver. MATLAB was used for ANN model, and LSDYNA® was used as FE solver. For this purpose, first ballistic tests were performed, and projectile residual velocities and depth of penetrations were measured. The FE model was confirmed by ballistic tests. After the FE model validation, FE analyses w...
Development of high performance long wavelength infrared HgCdTe focal plane arrays Barutçu, Berna; Beşikci, Cengiz; Department of Electrical and Electronics Engineering (2019) This thesis study reports the characterization of long wavelength infrared (LWIR) HgCdTe photovoltaic detectors with the p on n structure and 9.5 μm cut-off wavelength grown by molecular beam epitaxy on CdZnTe substrates and fabricated with different passivation processes. The characterization study was conducted at both pixel and focal plane array (FPA) levels. While the detectors exhibit diffusion dominated dark current at temperatures at and above 130 K under reverse bias voltages typically used in imagi...
Yüksek ve düşük basınç gaz deşarjların yerel olmayan plazmalarının 2D kinetik sayısal kodların geliştirilmesi ve yeni plazma teknolojilerininde uygulanması Rafatov, İsmail; Yedierler, Burak(2013)
Characterization of ultra-fine grained steel samples produced by high pressure torsion via magnetic barkhausen noise analysis Bayramoğlu, Sadık; Gür, Cemil Hakan; Department of Metallurgical and Materials Engineering (2009) High Pressure Torsion (HPT) is one of the most widely used severe plastic deformation methods which enable to obtain a crack free ultra-fine grained bulk material with improved mechanical properties like increased strength and toughness. In the process, a disc shaped sample is pressed between two anvils and deformed via surface friction forces by rotating one of the anvils. The aim of this study is to nondestructively characterize the variations in the deformation uniformity of the severely deformed steel d...

Citation Formats

B. Yedierler and İ. Rafatov, “Yüksek basınçlı glow deşarjların kendiliğinden yapılanmasının ve kararlı yanma şartlarının incelenmesi,” 2011. Accessed: 00, 2022. [Online]. Available: https://hdl.handle.net/11511/95791.