Performance analysis of a parabolic trough solar collector under varying load and solar radiation conditions

Download
1994
Şahin, Abdurrahman

Suggestions

Performance analysis of an air-to-air and a solar assisted heat pump
Şahin, Murat; Oskay, Rüknettin; Department of Mechanical Engineering (1995)
Performance analysis of a solar water heater module
Gürsoy, Ahmet; Taşdemiroğlu, Ersoy; Department of Mechanical Engineering (1990)
Performance analysis of grooved heat pipes using 3-D multi-channel thermal resistance network
Sezmen, Ramazan Aykut; Dursunkaya, Zafer; Çetin, Barbaros; Department of Mechanical Engineering (2021-9)
Heat pipes are phase change heat transfer devices that transfer high amounts of heat with low temperature differences compared to conventional cooling techniques due to their high thermal conductivity. Since heat pipes do not require any external power supply and not involve any moving parts, they are preferred for high reliability applications and in wide range of industrial applications from thermal management of electronics to space applications. Essentially, heat pipes use the advantage of occurring pha...
Performance evaluation of linear tube solar receiver as stratified flow vapor generator/separator for absorption machines using nh3/lino3
Çelik, Sıtkı Berat; Tarı, İlker; Neumann, Antonio Lecuona; Department of Mechanical Engineering (2020-9)
A parabolic trough solar collector acting as a desorber (vapor separator) has been recently suggested (Lecuona-Neumann, Rosner, & Ventas-Garzón, 2016) and (Famiglietti et al. 2018). The desorber significantly reduced the complexity and cost of a solar driven absorption heat pump. However, it introduced an innovative flow layout, which is a two-phase, boiling, gravity driven and stratified counter flow. The comprehension of its capabilities is necessary in order to unveil its potential. In the current wor...
Performance analysis of a solar-assisted heat pump with an evacuated tubular collector for domestic heating
Caglar, Ahmet; Yamali, Cemil (2012-11-01)
Performance of a solar-assisted heat pump with an evacuated tubular collector has been analyzed both theoretically and experimentally. A domestic heating system has been designed, constructed and tested. The evacuated tubular solar collector has been used to achieve higher collector efficiencies. The effects of evaporation temperature on the heating capacity and performance of the system have been investigated. Evaporation temperature varies between 5.2 and 20.7 degrees C while storage tank temperature vari...
Citation Formats
A. Şahin, “Performance analysis of a parabolic trough solar collector under varying load and solar radiation conditions,” Middle East Technical University, 1994.