Temperature responsive polymeric microgels for fouling removal during membrane filtrations

Aksoy, Canan
Kaner, Papatya
Saksiriwatekul, Meg
Asatekin, Ayşe
Çulfaz Emecen, Pınar Zeynep


Temperature and pH responsive hydrogels
Yılmaztürk, Nur Banu; Hasırcı, Nesrin; Department of Polymer Science and Technology (1998)
Temperature dependent band gap in SnS2xSe(2-2x) (x=0.5) thin films
Delice, S.; Isik, M.; Gullu, H. H.; Terlemezoglu, M.; Surucu, O. Bayrakli; Hasanlı, Nızamı; Parlak, Mehmet (Elsevier BV, 2020-08-01)
Structural and optical properties of SnS2xSe(2-2x) thin films grown by magnetron sputtering method were investigated for composition of x = 0.5 (SnSSe) in the present study. X-ray diffraction, energy dispersive X-ray spectroscopy, atomic force microscopy and scanning electron microscopy methods were used for structural characterization while temperature-dependent transmission measurements carried out at various temperatures in between 10 and 300 K were accomplished for optical investigations. X-ray diffract...
Temperature dependent dispersoid stability in ion-irradiated ferritic-martensitic dual-phase oxide-dispersion-strengthened alloy: Coherent interfaces vs. incoherent interfaces
Chen, Tianyi; Gigax, Jonathan G.; Price, Lloyd; Chen, Di; Ukai, S.; Aydoğan Güngör, Eda; Maloy, S. A.; Garner, F. A.; Shao, Lin (Elsevier BV, 2016-09-01)
In this study, the microstructure of a 12Cr ferritic-martensitic oxide-dispersion-strengthened (ODS) alloy is studied before and after Fe ion irradiation up to 200 peak displacements per atom (dpa). Irradiation temperature ranges from 325 to 625 degrees C. Before irradiation, both coherent and incoherent dispersoids exist in the matrix. In response to irradiation, the mean sizes of dispersoids in both the ferrite and tempered martensite phases change to equilibrium values that increase with irradiation temp...
Temperature effect on calcium aluminate cement based composite binders
Kırca, Önder; Tokyay, Mustafa; Department of Civil Engineering (2006)
In calcium aluminate cement (CAC) systems the hydration process is different than portland cement (PC) systems. The hydration products of CAC are subjected to conversion depending on temperature, moisture, water-cement ratio, cement content, etc. Consequently, strength of CAC system can be seriously reduced. However, presence of other inorganic binders or additives may alter the hydration process and improve various properties of CAC based composites. The objective of this study is to investigate the temper...
Temperature dependent current-voltage characteristics of SnTe-based Schottky Barrier Diode
Güllü, Hasan Hüseyin; Yıldız, Dilber Esra; Terlemezoğlu, Makbule; Parlak, Mehmet (null; 2017-10-15)
Citation Formats
C. Aksoy, P. Kaner, M. Saksiriwatekul, A. Asatekin, and P. Z. Çulfaz Emecen, “Temperature responsive polymeric microgels for fouling removal during membrane filtrations,” presented at the Euromembrane 2018, Valencia, İspanya, 2018, Accessed: 00, 2022. [Online]. Available: https://hdl.handle.net/11511/96111.