Design and construction of a tuned vibration absorber with automatically adjustable tuning frequency

Date

2012-06-22

Author

Akkurt, Berşan
Bayık, Buğra
Çam, Eren
Erdoğan, Bilgehan
Özcan, Ahmet B.
Güven, Cüneyt
Bayız, Yağız Efe
Erol, Fulya
Özgen, Gökhan Osman
Konukseven, Erhan İlhan

Metadata

Show full item record

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Item Usage Stats

136
views

0
downloads

URI

https://hdl.handle.net/11511/97596

Conference Name

15th International Conference on Machine Design And Production (UMTIK 2012)

Collections

Department of Mechanical Engineering, Conference / Seminar

Suggestions

OpenMETU
Core

Design and construction of a high voltage impulse divider Özdemir, Kerem; Hızal, Mirzahan; Department of Electrical and Electronics Engineering (1999)
Design and implementation of a triple-band re-configurable microstrip antenna Onat, Sinan; Alatan, Lale; Demir, Şimşek (2006-09-12) A hybrid combination of RF MEMS and microstrip patch triple band inset-fed reconfigurable antenna is presented. A rectangular slot is placed on the antenna to obtain a dual frequency antenna. Furthermore, MEMS switches are placed on the slot to change the electrical length of the slot and obtain a third resonance frequency. Similarly, MEMS switches are used in the inset to match the antenna input impedance at different frequencies. All of the parts are manufactured and the hybrid structure will be built.
Design and fabrication of a high gain, broadband microwave limiting amplifier module Kılıç, Hasan Hüseyin; Demir, Şimşek; Department of Electrical and Electronics Engineering (2011) Microwave limiting amplifiers are the key components of Instantaneous Frequency Measurement (IFM) systems. Limiting amplifiers provide constant output power level in a wide input dynamic range and over a broad frequency band. Moreover, limiting amplifiers are high gain devices that are used to bring very low input power levels to a constant output power level. Besides, limiting amplifiers are required to provide minimum small signal gain ripple in order not to reduce the sensitivity of the IFM system over t...
Design and implementation of a broadband I-Q vector modulator and a feedforward linearizer for V/UHF band Ünlü Özkaya, Ayşe; Demir, Şimşek; Department of Electrical and Electronics Engineering (2010) Considering the requirements of the commercial and military applications on amplitude and phase linearity, it is necessary to reduce nonlinearity of the amplifiers. There are several linearization techniques that are used to reduce nonlinearity effects. Feedforward linearization technique is known as one of the best linearization methods due to its superior linearization performance and broadband operation. Vector modulators which allows amplitude and phase modulation simultaneously, is the most important c...
Design and implementation of VHF-UHF antenna with non-foster matching circuit Aşcı, Cihan; Aydın Çivi, Hatice Özlem; Department of Electrical and Electronics Engineering (2018) Matching networks are widely used in the antenna transmitter and receiver applications and thus they are an essential part of the RF system. Conventional passive matching networks are very broadly used for matching an antenna for a narrow band of frequencies; however, achieving a broad bandwidth characteristics for electrically–small antennas (ESAs) is not possible with the use of passive matching circuits. ESAs possess a large input reactance and the electrical size of the antenna element is very small com...

Citation Formats

B. Akkurt et al., “Design and construction of a tuned vibration absorber with automatically adjustable tuning frequency,” presented at the 15th International Conference on Machine Design And Production (UMTIK 2012), Denizli, Türkiye, 2012, Accessed: 00, 2022. [Online]. Available: https://hdl.handle.net/11511/97596.