Experimental investigation of flow and thermal patterns in the rotated arc mixer

2012-11-18
Başkan Perçin, Özge
Speetjens, Michel
Metcalfe, Guy
Clercx, Herman
65th Annual Meeting of the APS DFD Conference

Suggestions

Experimental investigation of flow and thermal patterns in the rotated arc mixer
Başkan Perçin, Özge; Speetjens, Michel; Metcalfe, Guy; Clercx, Herman (2012-09-09)
Experimental investigation of hydroforming of dishwasher parts
Akın, Tolga; Gökler, Mustafa İlhan; Department of Mechanical Engineering (1997)
Experimental investigation of turbulent flow and wind comfort characteristics of fractal wind fences
Çoşkun, Şemsi; Kurç, Özgür; Department of Civil Engineering (2017)
The characteristics of turbulent flow behind the fractal fences are rather new research area. Previous studies on fractal fences showed that there are clear differences in the flow characteristics as compared with the conventional fences. This study presents the results and comparisons of an experimental study that investigates the turbulent flow and wind comfort characteristics of fractal wind fences. Four different wind fences, three of which have fractal geometries, with the same height, width, and poros...
Experimental Investigation of Strength of Curved Beam by Thin Ply Non-Crimp Fabric Laminates
Arca, M. A.; PAPİLA, MELİH; Çöker, Demirkan (2016-06-09)
Resistance against delamination failure and through the thickness tensile properties of curved carbon fiber reinforced plastics composites are investigated experimentally by conducting the curved beam strength tests. Effect of novel material thin ply non crimp fabric (NCF) architecture on delamination resistance of carbon fiber reinforced composites are investigated and compare with that of standard UD layups. In order to determine through the thickness tensile properties of curved carbon fiber composites, ...
Experimental investigation of near and far field flow characteristics of circular and non-circular turbulent jets
Taşar, Gürsu; Özgen, Serkan; Department of Aerospace Engineering (2008)
The atomization problem of high speed viscous jets has many applications in industrial processes and machines. In all these applications, it is required that the droplets have high surface area/volume ratio meaning that the droplets should be as small as possible. This can be achieved with high rates of turbulence and mixing of the flow. In order to constitute a foresight of geometry e ects on droplet size, experimental investigation and the determination of flow characteristics in near and far fields of a ...
Citation Formats
Ö. Başkan Perçin, M. Speetjens, G. Metcalfe, and H. Clercx, “Experimental investigation of flow and thermal patterns in the rotated arc mixer,” presented at the 65th Annual Meeting of the APS DFD Conference, California, Amerika Birleşik Devletleri, 2012, Accessed: 00, 2022. [Online]. Available: https://hdl.handle.net/11511/97694.