Determination of the mechanical properties of polyester based fiber-reinforced composites

Download
056583.pdf
1996
Özdemir, Ömer
Show full item record
144
views
0
downloads
https://hdl.handle.net/11511/11236
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Determination of mechanical properties of hybrid fiber reinforced concrete
Yurtseven, Alp Eren; Tokyay, Mustafa; Department of Civil Engineering (2004)
Fiber reinforcement is commonly used to provide toughness and ductility to brittle cementitious matrices. Reinforcement of concrete with a single type of fiber may improve the desired properties to a limited level. A composite is termed as hybrid, if two or more types of fibers are rationally combined to produce a composite that derives benefits from each of the individual fibers and exhibits a synergetic response. This study aims to characterize and quantify the mechanical properties of hybrid fiber reinfo...
Determination of passive vibration isolation characteristics of jet aircraft avionics
Eker, Zafer; Yaman, Yavuz; Department of Aerospace Engineering (2019)
Airborne electronics are subjected to adverse effects of vibration exposure that is defined by military standards to be used in the design stage. It is important to ensure the sustainability of such equipment through vibration isolation. Passive isolation mechanism distinguishes as the simplest practice for this purpose, which is applied in this study. In this thesis, a complete design of the isolation system is achieved by creating the representative mathematical model, implementing the vibration analysis ...
Determination of the Interface Properties of p-CZTSe/n-Si Nanowire Heterojunction Diode
Bayraklı, Özge; Terlemezoğlu, Makbule; Güllü, Hasan Hüseyin; Yıldız, Dilber Esra; Çolakoğlu, Tahir; Coşkun, Emre; Parlak, Mehmet (null; 2017-12-01)
Determination of current transport characteristics in Au-Cu/CuO/n-Si Schottky diodes
Surucu, O. Bayrakli; Güllü, Hasan Hüseyin; Terlemezoglu, M.; Yildiz, D. E.; Parlak, M. (Elsevier BV, 2019-10-01)
In this study, the material properties of CuO thin films fabricated by sputtering technique and electrical properties of CuO/n-Si structure were reported. Temperature-dependent current-voltage (I-V) measurement was carried out to determine the detail electrical characteristics of this structure. The anomaly in thermionic emission (TE) model related to barrier height inhomogeneity at the interface was obtained from the forward bias I-V analysis. The current transport mechanism at the junction was determined ...
Determination of optical parameters of Ga0.75In0.25Se layered crystals
IŞIK, MEHMET; Hasanlı, Nızamı (2012-05-01)
The optical properties of the Ga0.75In0.25Se crystals have been investigated by means of transmission and reflection measurements in the wavelength range of 380-1100 nm. The analysis of the results performed at room temperature revealed the presence of optical indirect transtions with band gap energy of 1.89 eV. The variation of the band gap energy as a function of temperature was also studied in the temperature range of 10-300 K. The rate of change of band gap energy (? = 6.2 x 10(4) eV/K) and absolute zer...
Citation Formats
Ö. Özdemir, “Determination of the mechanical properties of polyester based fiber-reinforced composites,” Middle East Technical University, 1996.
METU IIS - Integrated Information Service open@metu.edu.tr