Development of a three dimensional multiblock parallel Navie-Stokes solver

Download
116561.pdf
2001
Şen, Turgut Serkan
Show full item record
124
views
0
downloads
Fluid dynamics, Navier-Stokes equations., Parallel computers.
https://hdl.handle.net/11511/12431
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Development of a pc numerical system for high voltage sphere gap control
Kasap, Onur; Hızal, Mirzahan; Department of Electrical and Electronics Engineering (2005)
In this thesis, a high precision motion and position control system has been developed and applied to a high voltage sphere gap control and measurement system. The system is able to support up to 3-axes position and motion control. The control system includes a microcontroller card, three DC servo motor driver cards and a data storage unit. To provide communication between computer and motion control system, the Universal Serial Bus (USB) port is used. The microcontroller card is equipped with an USB interf...
Implementation of k-epsilon turbulence models in a two dimensional parallel navier-stokes solver on hybrid grids
Kalkan, Onur Ozan; Tuncer, İsmail Hakkı; Department of Aerospace Engineering (2014)
In this thesis, the popular k-ε turbulence model is implemented on a parallel, 2-dimensional, explicit, density-based, finite volume based Navier-Stokes solver works on hybrid grids, HYP2D. Among the other versions available in the open literature, standard version of the k-ε turbulence mode is studied. Launder-Spalding and Chieng-Launder wall functions are adapted to the turbulence model in order to investigate the effects of the strong gradients in the vicinity of the wall on the turbulence. In order to i...
Development of electrochemical etch-stop techniques for integrated MEMS sensors
Yaşınok, Gözde Ceren; Akın, Tayfun; Department of Electrical and Electronics Engineering (2006)
This thesis presents the development of electrochemical etch-stop techniques (ECES) to achieve high precision 3-dimensional integrated MEMS sensors with wet anisotropic etching by applying proper voltages to various regions in silicon. The anisotropic etchant is selected as tetra methyl ammonium hydroxide, TMAH, considering its high silicon etch rate, selectivity towards SiO2, and CMOS compatibility, especially during front-side etching of the chip/wafer. A number of parameters affecting the etching are inv...
Development of a tool for web based control engineering education
Ciğeroğlu, Hüseyin; Yüksel, Önder; Department of Electrical and Electronics Engineering (2004)
It is obvious that learning is more productive with visual mediums and simulations. Especially in technical subjects, this approach is more important. Visual modification of parameters in a control system provides many benefits both in analyzing the system and in learning process. Additionally if this material is published on the internet, students can reach anywhere anytime to this material. This thesis describes a Web-based system developed for control engineering education for both the instructor and the...
Implementation of a risc microcontroller using fpga
Gümüş, Raşit; Güran, Hasan; Department of Electrical and Electronics Engineering (2005)
In this thesis a microcontroller core is developed in an FPGA. Its instruction set is compatible with the microcontroller PIC16XX series by Microchip Technology. The microcontroller employs a RISC architecture with separate busses for instructions and data. Our goal in this research is to implement and evaluate the design in the FPGA. Increasing performance and gate capacity of recent FPGA devices permits complex logic systems to be implemented on a single programmable device. Such a growing complexity dema...
Citation Formats
T. S. Şen, “Development of a three dimensional multiblock parallel Navie-Stokes solver,” Ph.D. - Doctoral Program, Middle East Technical University, 2001.
METU IIS - Integrated Information Service open@metu.edu.tr