Dynamic analysis of spur gears

Download
1999
Dogruer, Can Ulas

Suggestions

Dynamic analysis of geared shaft systems by using continuous system models
Şener, Ömer Sedat; Özgüven, Hasan Nevzat; Department of Mechanical Engineering (1989)
DYNAMIC ANALYSIS OF GEARED ROTORS BY FINITE-ELEMENTS
KAHRAMAN, A; Özgüven, Hasan Nevzat; HOUSER, DR; ZAKRAJSEK, JJ (1992-09-01)
A finite element model of a geared rotor system on flexible bearings has been developed. The model includes the rotary inertia of shaft elements, the axial loading on shafts, flexibility and damping of bearings, material damping of shafts and the stiffness and the damping of gear mesh. The coupling between the torsional and transverse vibrations of gears were considered in the model. A constant mesh stiffness was assumed. The analysis procedure can be used for forced vibration analysis of geared rotors by c...
Dynamic modeling and analysis of spur and helical gears on flekible rotors
Kesan, Mete; Özgüven, Hasan Nevzat; Department of Mechanical Engineering (1992)
Dynamic analysis of flow in two dimensional flow
Engin, Erjona; Tarman, Işık Hakan; Department of Engineering Sciences (2008)
The Poiseuille Flow is the flow of a viscous incompressible fluid in a channel between two infinite parallel plates. The behaviour of flow is properly described by the well-known Navier-Stokes Equations. The fact that Navier-Stokes equations are partial differential equations makes their solution difficult. They can rarely be solved in closed form. On the other hand, numerical techniques can be applied successfully to the well-posed partial differential equations. In the present study pseudo-spectral method...
DYNAMIC ANALYSIS OF HIGH-SPEED GEARS BY USING LOADED STATIC TRANSMISSION ERROR
Özgüven, Hasan Nevzat (1988-08-22)
A single degree of freedom non-linear model is used for the dynamic analysis of a gear pair. Two methods are suggested and a computer program is developed for calculating the dynamic mesh and tooth forces, dynamic factors based on stresses, and dynamic transmission error from measured or calculated loaded static transmission errors. The analysis includes the effects of variable mesh stiffness and mesh damping, gear errors (pitch, profile and runout errors), profile modifications and backlash. The accuracy o...
Citation Formats
C. U. Dogruer, “Dynamic analysis of spur gears ,” Middle East Technical University, 1999.