Dynamic analysis of geared shaft systems by using continuous system models

Download
006807.pdf
1989
Şener, Ömer Sedat
Show full item record
111
views
0
downloads
https://hdl.handle.net/11511/6232
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

DYNAMIC ANALYSIS OF GEARED SHAFT SYSTEMS BY USING A CONTINUOUS SYSTEM MODEL
Şener, Ö Sedat; Özgüven, Hasan Nevzat (Elsevier BV, 1993-09-22)
In this study dynamic mesh forces and dynamic factors in a geared shaft system are studied by using a continuous system model. The system consists of a gear pair, two shafts carrying gears, and two inertias representing drive and load in the system. A continuous system model is used to include the shaft inertias, which are usually disregarded even in most of the sophisticated models. The primary aim of this work is to provide a tool for studying the effect of shaft inertia in gear dynamics, and to present s...
DYNAMIC ANALYSIS OF GEARED ROTORS BY FINITE-ELEMENTS
KAHRAMAN, A; Özgüven, Hasan Nevzat; HOUSER, DR; ZAKRAJSEK, JJ (1992-09-01)
A finite element model of a geared rotor system on flexible bearings has been developed. The model includes the rotary inertia of shaft elements, the axial loading on shafts, flexibility and damping of bearings, material damping of shafts and the stiffness and the damping of gear mesh. The coupling between the torsional and transverse vibrations of gears were considered in the model. A constant mesh stiffness was assumed. The analysis procedure can be used for forced vibration analysis of geared rotors by c...
Dynamic analysis of spur gears
Dogruer, Can Ulas; Özgüven, Hasan Nevzat; Department of Mechanical Engineering (1999)
DYNAMIC ANALYSIS OF HIGH-SPEED GEARS BY USING LOADED STATIC TRANSMISSION ERROR
Özgüven, Hasan Nevzat (1988-08-22)
A single degree of freedom non-linear model is used for the dynamic analysis of a gear pair. Two methods are suggested and a computer program is developed for calculating the dynamic mesh and tooth forces, dynamic factors based on stresses, and dynamic transmission error from measured or calculated loaded static transmission errors. The analysis includes the effects of variable mesh stiffness and mesh damping, gear errors (pitch, profile and runout errors), profile modifications and backlash. The accuracy o...
Dynamic analysis of multi-stage helical geared rotors with transfer matrix method
Okan, Safa Tarkan; Özgüven, Hasan Nevzat; Department of Mechanical Engineering (1994)
Citation Formats
Ö. S. Şener, “Dynamic analysis of geared shaft systems by using continuous system models,” Middle East Technical University, 1989.
METU IIS - Integrated Information Service open@metu.edu.tr