Thermoelastic Stresses in a Rod Subjected to Periodic Boundary Condition An Analytical Treatment

2015-09-01
Eraslan, Ahmet Nedim
Apatay, Tunç
Show full item record
68
views
0
downloads
https://hdl.handle.net/11511/74578
Journal of Multidisciplinary Engineering Science and Technology
Department of Engineering Sciences, Article

Suggestions

Thermoplastic response of a linearly hardening cylinder subjected to nonuniform heat source and convective boundary condition
Eraslan, Ahmet Nedim (Informa UK Limited, 2004-05-01)
An analytical model based on Tresca's yield criterion and its L associated flow rule is developed to analyze the thermoelastoplastic response of a linearly hardening cylinder subjected to a nonuniform heat source and convective heat transfer condition at the external boundary. Closed form solutions are obtained for a state of generalized plane strain in different stages of elastic-plastic deformation. Considering a cylinder that is constrained axially, the plastic deformation commences at the axis and depen...
Thermoelastic waves in anisotropic media.
Göçer, Cengiz; Department of Mechanical Engineering (1973)
Thermoelastic response of a fin exhibiting elliptic thickness profile: An analtical solution
Eraslan, Ahmet Nedim (Elsevier BV, 2008-03-01)
A thermoelastic analytical solution of a variable thickness cooling fin problem is presented. A variable thickness annular fin mounted on a hot rotating rigid shaft is considered. The thickness of the fin is assumed to vary radially in a continuously variable nonlinear elliptic form. An energy equation that accounts for the conduction, convective heat loss from peripheral and edge surfaces, thickness variation and rotation is adopted. The thermoelastic equation is obtained under formal assumptions of plane ...
Thermoelastoplastic response of composite tubes subjected to nonuniform heat source external pressure and convective boundary condition /
Kartal, Mehmet Emin; Eraslan, Ahmet Nedim; Department of Engineering Sciences (2004)
Thermoviscoelasticity of fibre reinforced rubbery polymers
Dal, Hüsnü; Hickmann, Rico; Cherif, Chokri; Jurk, Rene; Heinrich, Gert (2010-03-26)
Fibre or textile reinforcement is commonly used in order to enhance the directional mechanical and thermal properties of rubbery polymers. For the quantitative analysis and design of fibre reinforced elastomeric materials, precise description of the composite behaviour plays a crucial role. To this end, a coupled thermomechanical formulation at finite strains is presented. The anisotropic thermal and mechanical properties are homogenized analytically throughout the constitutive description. For the descript...
Citation Formats
A. N. Eraslan and T. Apatay, “Thermoelastic Stresses in a Rod Subjected to Periodic Boundary Condition An Analytical Treatment,” Journal of Multidisciplinary Engineering Science and Technology, pp. 2438–2444, 2015, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/74578.
METU IIS - Integrated Information Service open@metu.edu.tr