Effects of the Doping Elements (Co, Mn, Mg) on Ultrasonic Spray Deposited NiO Thin Films and Their H2O2/Glucose Sensing Behavior

Date

2021-12-03

Author

Tutel, Yusuf
Koylan, Serkan
Tunca, Şensu
Ünalan, Hüsnü Emrah

Metadata

Show full item record

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Item Usage Stats

181
views

0
downloads

URI

https://hdl.handle.net/11511/99014

Conference Name

Materials Research Society Fall 2021 Meeting

Collections

Department of Metallurgical and Materials Engineering, Conference / Seminar

Suggestions

OpenMETU
Core

Effects of reactor geometry on dissociating CO2 and electrode degradation in a MHCD plasma reactor Taylan, Onur; Pinero, Daniel; Berberoğlu, Halil (2018-08-01) This paper reports an experimental study on the effects of reactor geometry for dissociating carbon dioxide using a microhollow cathode discharge (MHCD) reactor, and the associated electrode degradation. A MHCD reactor consists of two hollow metal electrodes that are separated by dielectric material. The geometric reactor parameters studied were the dielectric material thickness and the diameter of the reactor hole. Dielectric thicknesses of 150, 300 and 450 mu m and discharge hole diameters of 200, 400 and...
Effects of Solvents on Dissolution of Photoresist in Parylene Microchannels Koydemir, Hatice Ceylan; Külah, Haluk; Özgen, Canan; Tosun, İsmail (2012-06-21) This paper presents a study for the effects of different types of solvents on dissolution of photo resist inside the parylene micro channels. Theoretical and experimental studies were carried out to model the dynamic behavior of the dissolution. In this account, dissolution rate expressions were derived by taking into account the reaction of resist with the solvent. Micro channels with a cross section of 15 mu m x 50 mu m were fabricated by encapsulating photo resist inside the parylene layers and using gla...
Effects of physical growth conditions on the structural and optical properties of sputtered grown thin HfO2 films AYGÜN ÖZYÜZER, GÜLNUR; Cantas, Ayten; Simsek, Yilmaz; Turan, Raşit (Elsevier BV, 2011-06-30) HfO2 thin films were prepared by reactive DC magnetron sputtering technique on (100) p-Si substrate. The effects of O-2/Ar ratio, substrate temperature, sputtering power on the structural properties of HfO2 grown films were studied by Spectroscopic Ellipsometer (SE), X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectrum, and X-ray photoelectron spectroscopy (XPS) depth profiling techniques. The results show that the formation of a SiOx suboxide layer at the HfO2/Si interface is unavoidable. Th...
Effects of synthesis, doping methods and metal content on thermoluminescence glow curves of lithium tetraborate Kayhan, Mehmet; Yılmaz, Ayşen (Elsevier BV, 2011-07-28) Lithium tetraborate: Li(2)B(4)O(7), (LTB) has been synthesized and doped with various Mn content by different methods, such as, high temperature solid state synthesis and solution assisted synthesis methods. Powder XRD results proved the formation of solid-solution by replacing Mn with Li ions in LTB lattice at lower amount of Mn doping, for example 0.1-3.0% Mn doping. In this research TL glow curves of Mn doped lithium tetraborate (LTB: Mn) produced by using different synthesis and doping methods and the e...
Effects of Ethylene Oxide Resterilization and In-vitro Degradation on Mechanical Properties of Partially Absorbable Composite Hernia Meshes Endoğan Tanır, Tuğba; Kulacoglu, H.; Serbetci, K.; Kiyak, G.; Hasırcı, Nesrin (2013-11-01) Background and Aim: Prosthetic mesh repair for abdominal wall hernias is widely used because of its technical simplicity and low hernia recurrence rates. The most commonly used material is pure polypropylene mesh, although newer composite materials are recommended by some centers due to their advantages. However, these meshes are more expensive than pure polypropylene meshes. Resterilization of a pure polypropylene mesh has been shown to be quite safe, and many centers prefer slicing a large mesh into small...

Citation Formats

Y. Tutel, S. Koylan, Ş. Tunca, and H. E. Ünalan, “Effects of the Doping Elements (Co, Mn, Mg) on Ultrasonic Spray Deposited NiO Thin Films and Their H2O2/Glucose Sensing Behavior,” presented at the Materials Research Society Fall 2021 Meeting, Massachusetts, Amerika Birleşik Devletleri, 2021, Accessed: 00, 2022. [Online]. Available: https://hdl.handle.net/11511/99014.