An ultrasonic assisted method for fabricating metal layers on thermoplastic substrates for lab-on-a-chip

Date

2022-07-11

Author

FARAHANI, SARAH
GÜMÜŞTAŞ, AYŞEN
ÜLKÜ, MERT KEREM
TAMER, UĞUR
Arıkan, Mehmet Ali Sahir
Yıldırım, Ender

Metadata

Show full item record

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Item Usage Stats

243
views

0
downloads

URI

https://hdl.handle.net/11511/99085

Conference Name

Microfluidics 2022

Collections

Department of Mechanical Engineering, Conference / Seminar

Suggestions

OpenMETU
Core

An electrostatically actuated parylene microvalve for lab on a chip applications Yıldırım, Ender; Arıkan, Mehmet Ali Sahir; Külah, Haluk (2011-07-05) This paper presents a novel electrostatic microvalve to control in-plane flow on parylene based lab-on-a-chip-devices. Normally-closed design of the microvalve insulates the working fluid from the electric field, while providing low leakage up to 40 kPa inlet pressure. Prototypes are fabricated and tested for pull-in and flow characterization. Pull-in voltage is measured to be 150 V independent of the working fluid. No leakage is detected up to 20 kPa inlet pressure.
AN INTERFEROMETRIC TECHNIQUE FOR MEASURING MICRON LEVEL CLEARANCES FILLED WITH A LUBRICANT Yildirim, Murat; Dursunkaya, Zafer; Okutucu Özyurt, Hanife Tuba (2010-10-20) The aim of this study is to develop an interferometric technique to measure micron level clearances occurring in small piston-cylinder arrangements; such as hermetically sealed compressors. A Cartesian model of the piston cylinder arrangement is manufactured and lateral and vertical motions are generated via a step motor, and micrometers, respectively, to simulate the piston motion and the change of clearance during the motion. Experiments are conducted in air and a lubricant. Measurements show the importan...
A facile method for the recovery of ionic liquid and lignin from biomass pretreatment DIBBLE, DEAN; LI, CHENLIN; LAN, SUN; GEORGE, ANTHE; CHENG, AURELIA; Persil Çetinkol, Özgül; BENKE, PETER; HOLMES, BRADLEY; SINGH, SEEMA; SIMMONS, BLAKE (2011-01-01) In the biochemical conversion of lignocellulosic biomass to biofuels, the process of pretreatment is currently one of the most difficult and expensive operations. The use of ionic liquids (ILs) in biomass pretreatment has received considerable attention recently because of their effectiveness at decreasing biomass recalcitrance to subsequent enzymatic hydrolysis. In addition, ILs have the potential for decreasing the need for corrosive or toxic chemicals and associated waste streams that can be generated by...
An effective surface design based on a conjugated polymer and silver nanowires for the detection of paraoxon in tap water and milk Turan, Janset; Kesik, Melis; Söylemez, Saniye; Göker, Seza; Coşgun, Şahin; Ünalan, Hüsnü Emrah; Toppare, Levent Kamil (2016-07-17)
An effective surface design based on a conjugated polymer and silver nanowires for the detection of paraoxon in tap water and milk Turan, Janset; Kesik, Melis; SÖYLEMEZ, SANİYE; Goker, Seza; Coskun, Sahin; Ünalan, Hüsnü Emrah; Toppare, Levent Kamil (2016-06-02) In this study, a novel approach for the fabrication of a biosensor utilizing a conducting polymer and silver nanowires is reported. To obtain immobilization platform for butyrylcholinesterase (BChE), a graphite electrode was modified with the poly(5,6-bis(octyloxy)-4,7-di(thieno[3][3,2-b]thiophen-2yl)benzo[c][1,2,5]oxoadiazole) (PTTBO) which has a hydrophobic alkyl chain as the pendant group providing hydrophobic nature to the matrix. Since biomolecules contain both hydrophobic and hydrophilic parts in thei...

Citation Formats

S. FARAHANI, A. GÜMÜŞTAŞ, M. K. ÜLKÜ, U. TAMER, M. A. S. Arıkan, and E. Yıldırım, “An ultrasonic assisted method for fabricating metal layers on thermoplastic substrates for lab-on-a-chip,” presented at the Microfluidics 2022, Heidelberg, Almanya, 2022, Accessed: 00, 2022. [Online]. Available: https://hdl.handle.net/11511/99085.