A monolithic phased array using rf mems technology

Download
index.pdf
2007
Topallı, Kağan
Show full item record
198
views
135
downloads
This thesis presents a novel monolithic phased array implemented using the RF MEMS technology. The structure, which is designed at 15 GHz, consists of four linearly placed microstrip patch antennas, 3-bit distributed RF MEMS low-loss phase shifters, and a corporate feed network. The RF MEMS phase shifter employed in the system consists of three sections with a total of 28 unit cells, and it occupies an area of 22.4 mm 2.1 mm. The performance of the phase shifters is improved using high-Q metal-air-metal capacitors in addition to MEMS switches as loading elements on a high-impedance coplanar waveguide transmission line. The phased array is fabricated monolithically using an in-house surface micromachining process, where a 1.2-m thick gold structural layer is placed on a 500-m thick glass substrate with a capacitive gap of 2 m. The fabrication process is simple, requires only 6 masks, and allows the implementation of various RF MEMS components on the same substrate, such as RF MEMS switches and phase shifters. The fabricated monolithic phased array occupies an area of only 6 cm 5 cm. The measurement results show that the phase shifter can provide nearly 20/50/95 phase shifts and their eight combinations at the expense of 1.5 dB average insertion loss at 15 GHz. The phase shifters can be actuated with 16 V, while dissipating negligible power due to its capacitive operation. It is also shown by measurements that the main beam can be steered to 4 and 14 by suitable settings of the RF MEMS phase shifters.
Electronics.
http://etd.lib.metu.edu.tr/upload/2/12608436/index.pdf
https://hdl.handle.net/11511/17230
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Design and Implementation of a Microprocessor Based Data Collection and Interpretation System with Onboard Graphical Interface
Göksügür, Gökhan; Güran, Hasan Cengiz; Department of Electrical and Electronics Engineering (2004)
This thesis reports the design and implementation of a microprocessor based interface unit of a navigation system. The interface unit is composed of a TFT display screen for graphical interface, a Controller Circuit for system control, a keypad interface for external data entrance to the system and a power interface circuit to provide interface between the battery of the navigation system and the Controller Circuit. This thesis reports high speed design of the Controller Circuit and generation of system fun...
The implementation of a direct digital synthesis based function generator using SystemC and VHDL
Kazancıoğlu, Uğur; Aşkar, Murat; Department of Electrical and Electronics Engineering (2007)
In this thesis, a direct digital synthesis (DDS) based function generator design module is presented, defined and implemented using two digital hardware modeling/design languages namely SystemC and VHDL. The simulation, synthesis and applicability performances of these two design languages are compared by following all digital hardware design stages. The advantages and open issues of SystemC based hardware design flow are emphasized in order to be a reference for future studies. SystemC initially appeared a...
A novel modeling methodology and performance improvement technique for DMTL phase shifters
İstanbulluoğlu, İpek; Akın, Tayfun; Department of Electrical and Electronics Engineering (2006)
This thesis presents distributed MEMS transmission line (DMTL) phase shifters, emphasizing the circuit modeling and design as well as the performance improvement. A novel modeling methodology is introduced for DMTL unit sections, with bridge widths larger than 50 μm. The introduced model is compared with EM simulation results and the CLR modeling results. For structures with bridge widths larger than 50 μm, the introduced model fits the simulation results much better than the CLR model. The simulated struct...
A low-cost uncooled infrared detector array and its camera electronics
Akçören, Dinçay; Akın, Tayfun; Eminoğlu, Selim; Department of Electrical and Electronics Engineering (2011)
This thesis presents the development of integrated readout electronics for diode type microbolometers and development of external camera electronics for microbolometers. The developed readout electronics are fabricated with its integrated 160x120 resolution FPA (Focal Plane Array) in the XFAB SOI-CMOS 1.0 μm process. The pixels in the FPA have 70 μm pixel pitch, and they are sensitive in the 8–12 μm band of the infrared spectrum. Each pixel has 4 serially connected diodes, and diode turn on voltage changes ...
Implementation of a risc microcontroller using fpga
Gümüş, Raşit; Güran, Hasan; Department of Electrical and Electronics Engineering (2005)
In this thesis a microcontroller core is developed in an FPGA. Its instruction set is compatible with the microcontroller PIC16XX series by Microchip Technology. The microcontroller employs a RISC architecture with separate busses for instructions and data. Our goal in this research is to implement and evaluate the design in the FPGA. Increasing performance and gate capacity of recent FPGA devices permits complex logic systems to be implemented on a single programmable device. Such a growing complexity dema...
Citation Formats
K. Topallı, “A monolithic phased array using rf mems technology,” Ph.D. - Doctoral Program, Middle East Technical University, 2007.
METU IIS - Integrated Information Service open@metu.edu.tr